WUBEN G2 Multi-functional EDC Keychain Light
The WUBEN G2 Multi-functional EDC Keychain Light features the Osram P9 LED which will emit 5 brightness levels including an impressive turbo mode and a moon mode, it can run for 70 continuous hours on one charge! Though just 28g with 27mm width and 58.5mm length, G2 still manages to pack a punch! The built-in magnet will give you mounting options to free your hands! Conveniently charged with USB-C, G2 also has battery level indicators for its built-in 280 mAh cell! Its keyring, magnetic mounting and clip gives the G2 multiple usage options! Finally, it’s available in blue, green and black!
The G2 comes with a USB-C charging cable, a removable belt clip, user manual, and a removable keychain clip.
WUBEN G2 Multi-functional EDC Keychain Light Parameters
- Height (Length); 2.3″
- Width; 1.06″
- Depth; 0.36″
- Weight; 0.99 oz (internal battery)
- LED; Osram P9
- Beam Distance; 46 meters
- Impact Resistant; 1.5 meters
WUBEN G2 Multi-functional EDC Keychain Light Features
- Max Output; 500 lumens
- USB rechargeable
- Internal Lithium Battery (280 mAh)
- Battery Indicator
- Mode Memory
- Magnetic Base
- Removable Pocket Clip
- Removable Keychain Clip
The G2 has four regular lighting modes, plus Turbo. There are no emergency modes.
- Moonlight; 1 lumen – 70 hours
- Low; 15 lumens – 6 hours
- Medium; 65 lumens – 1.5 hours
- High; 200 lumens – 35 mins
- Turbo; 500 ~ 200 lumens – 5 mins ~ 30 min
The power/mode button is on top, next to the USB port. A great little feature is whenever you turn the G2 on, the tiny battery indicator will come on for a few seconds to indicate battery power. Solid blue, indictaes an almost full charge. Flashing blue means it’s below 90%. Red means under 40% and if it’s flashing red you better charge it.
Holding the power button will turn on the G2. Pressing the power button turns it off. Holding the power button down when it’s powered on will switch between modes. The secret Turbo mode is accessed with a double click. Instinctivly I keep thinking pressing will switch modes and holding down will power it off.
The G2 arrives with the chain clip attached. It sits on the magnetized base. To remove it, you simply twist the attachment and pull it off. This reveals the magnet and allows it to be attached to a metallic surface.
I found the pocket clip to be the most useful accessory. I found it worked on a shirt or jacket front pocket. On a headband or even the strap on the back of my phone.
Overall, the WUBEN G2 Multi-functional EDC Keychain Light is too small and convient to not have!
Be the first to comment