XP-PEN Artist Display 13.3 Pro
The XP-PEN Artist Display 13.3 Pro is a super-portable screen with a 13.3-inch display area and featuring a convenient 3-in-1 cable design. There’s no need to use any adapter and it quickly connects to your computer via the HDMI port. Easily place it on your tabletop or anywhere to simplify your workspace and power your creativity.
The things included in the box are:
- Artist 13.3 Pro
- Portable Stand
- Battery-free Stylus
- Fenix Jigsaw Puzzle
- Art Print Poster
- Shortcuts Stickers Pack
- Pen Holder
- Drawing Glove
The holiday-themed packaging looks great, with the deep red and winter iconography. The included extras are a nice touch, with the puzzle and poster being nice additions. Also, you can get free line artwork if you buy the Artist 13.3Pro Holiday Edition.
XP-PEN Artist Display 13.3 Pro Review
The 3-in-1 cable allows you to connect the USB-C port on the Display 13.3 Pro to your PC via an HDMI and USB-A port. The other end goes into the included wall plug, which comes with various adapters for different regions.
The stand is a great touch and angles the 13.3 Pro display perfectly for drawing. Though there is only one position, which I was disappointed to find out. Though I’d much rather have it, as it is a lot more comfortable to use.
The pen case securely holds the pen in place, along with replacement nibs in the bottom section. The cap can also be used as a stand for the pen, as it does have the tendency to roll off. The pen doesn’t need charging and has two buttons on the side.
The display has eight clickable buttons, which can be assigned to different shortcut. There are a scrollable wheel and an amazing screen. The buttons and wheel have a good amount of feedback, so you know when you are using them. There is a nice rounded look to the display and bezels around the screen. The display is around 1.30cm thick, so very easy to carry around.
XP-PEN Artist Display 13.3 Pro Specs:
- Technology – Electromagnetic
- Dimension – 390.4mm(L)*249.98mm(W)*12.9mm(H)
- Display Area – 293.76mm(H) x 165.24mm(V)
- Display Resolution – 1920×1080 pixels
- Color Gamut – 88% NTSC , Adobe® RGB≧91%，sRGB≧123%
- Shortcut Keys – 8
- Roller wheel – 1
- Response Time – 14ms
- Pixel Pitch – 0.153 * 0.153mm
- Color Displays – 16.7M
- Contrast Ratio – 1000:1
- Viewing Angle – 178°
- Pressure Levels – 8,192
- Tilt – 60Degrees
- Report Rate – ≧220
- Resolution – 5080 LPI
- Accuracy – ±0.01inch(center)
- Reading Height – 10mm
- Supply Voltage – DC 5V
- USB Interface – USB
- Current consumption – 2A
- Power Consumption – 10W
My Datacolor SpyderX measured the colour support at 100% sRGB, 88% NTSC and 91% AdobeRGB. Colours look great and needed very little calibration out of the box. There isn’t any sign of parallax, this is due to the lamination on the display. I did have an issue with the pointer and the pen, but this was solved within the driver for the display. This comes with a 178-degree viewing angle which I was very impressed with. Also, it supports tilt within Photoshop, Painter, Krita, and Gimp.
XP-PEN Artist Display 13.3 Pro Review
I used this for around 4 hours I couldn’t detect much heat coming from the display. I would recommend using the glove though, as fingerprints are visible on the screen.
Drawing tests were mainly done with Photoshop 2021, Painter and Gimp. Photoshop was great, with the pressure sensitivity being picked up each time. Lines and curves looked great and responded really well. Also, painter was the same with the tilt function working great. The same can also be said for GIMP which responded just as well.
Overall, the XP-PEN Artist Display 13.3 Pro is a must-have for the holiday season. Also, the themed box and added goodies are a great touch and very much appreciated.
Finally, make sure to check out Jabba Reviews for more deals and reviews. Also, don’t forget to connect with the Jabba Reviews team on our Facebook or Twitter pages.
Be the first to comment